To change a tail light bulb on a Ford F150, you will need to follow these steps as shown in the video instruction above:

1. Locate the tail light assembly on the vehicle on the rear of the vehicle.
2. Open the tailgate to access the back of the tail light assembly screws.
3. Remove the two screws holding the tail light assembly in place.
4. Carefully pull the tail light assembly straight back from the vehicle and disconnect the electrical connector from the back of the assembly.
5. Locate the bulb that needs to be changed. It will likely be held in place by a twist-locking mechanism or a clip.
6. Carefully twist or push the bulb to release it from the assembly.
7. Replace the old bulb with a new one of the same type and size, and reassemble the tail light assembly in the reverse order of disassembly.
8. Test the light before pushing the assembly back in place.

Note: depending on the exact model and year of your Ford F150, the instructions may vary slightly and it is a good idea to check the manual to get accurate instructions.

The post F150 Turn Signal Replacement [2015, 2016, 2017, 2018, 2019, 2020]. first appeared on The Homend.